Last Modified: 11-29-2007 1.6 A
Service Category: Brake Section: Parking Brake
Model Year: 2008 Model: Sequoia Doc ID: RM000001EDH005X
Title: PARKING BRAKE: PARKING BRAKE ASSEMBLY: DISASSEMBLY (2008 Sequoia)

DISASSEMBLY

1. REMOVE REAR WHEEL LH

2. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH

(a) Remove the 2 bolts and disconnect the rear disc brake cylinder.

NOTICE:

  • Do not disconnect the flexible hose from the disc brake cylinder.
  • Do not twist or bend the flexible hose.

(b) Hang the disc brake cylinder with a piece of wire.

3. REMOVE REAR DISC BRAKE (REAR): REAR BRAKE: REMOVAL (2008 Sequoia)+

4. REMOVE PARKING BRAKE SHOE RETURN SPRING

(a) Using SST, remove the return spring.

SST: 09703-30010

5. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY LH

(a) Using SST, remove the shoe hold down spring cup, compression spring and shoe hold down spring pin.

SST: 09718-00011

(b) Disconnect the tension spring from the No. 1 parking brake shoe.

(c) Remove the No. 1 parking brake shoe and shoe adjuster screw set.

6. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY LH

(a) Using SST, remove the shoe hold down spring cup, compression spring and shoe hold down spring pin.

SST: 09718-00011

(b) Remove the No. 2 parking brake shoe.

7. REMOVE PARKING BRAKE SHOE LEVER LH

(a) Disconnect the No. 3 parking brake cable from the parking brake shoe lever.

(b) Remove the parking brake shoe lever.

8. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY

(a) Remove the bolt and No. 3 parking brake cable.

9. REMOVE PARKING BRAKE ANCHOR BLOCK

(a) Remove the 2 nuts and anchor block.